Gas Heater Service
Gas Heater Servicing — All Brands, All Melbourne Suburbs
Gas Heater Service Melbourne
Keep your gas heater running safely and efficiently with a professional annual service from The Gas Doctor. We service all brands across metro and suburban Melbourne — Rinnai, Brivis, Cannon, Braemar, Vulcan, and more. Licensed gas fitters, fixed upfront pricing.
Why Should You Service Your Gas Heater Every Year?
A gas heater that looks fine on the outside can be dangerous on the inside. Annual servicing is not just about keeping your heater running well — it is about keeping your family safe from carbon monoxide, gas leaks, and fire risk.
In Victoria, landlords are legally required to service gas heaters in rental properties every 2 years under the Residential Tenancies Act. But for owner-occupiers, annual servicing is strongly recommended by gas safety authorities and heater manufacturers alike.
Carbon Monoxide Safety
A cracked heat exchanger can allow CO to enter your home’s air supply. CO is colourless, odourless, and potentially fatal. We check for this every service.
Gas Leak Prevention
We test all gas connections and fittings for leaks. A small leak left undetected can become a serious hazard — we find them before they become a problem.
Heater Efficiency
A serviced heater runs more efficiently, heating your home faster and using less gas. Reduced running costs are a direct benefit of regular maintenance.
Extended Heater Life
Catching minor wear before it becomes a breakdown means your heater lasts longer. Replacing a component in a service is far cheaper than replacing the whole unit.
Warranty Compliance
Most gas heater manufacturers require proof of annual servicing to maintain warranty coverage. We document every service so you stay covered.
Rental Compliance
Victorian landlords must service gas heaters every 2 years and keep records. We provide a service record for your files — ready for inspection at any time.
What Does a Gas Heater Service Include?
Our standard gas heater service covers everything needed to assess safety, performance, and condition. Here is exactly what we check and do on every visit.
Standard Gas Heater Service Checklist
✓Visual inspection of the heater body, casing, and vents
✓Heat exchanger inspection for cracks or corrosion
✓Carbon monoxide (CO) emissions test
✓Flue integrity check and spillage test
✓Gas pressure test at the heater
✓Burner and ignition system inspection and clean
✓Pilot light inspection and adjustment
✓Fan motor and filter clean (ducted systems)
✓Thermostat operation check
✓Safety device testing (overheat cutout, flame failure)
✓Gas connection and fitting leak test
✓Service record issued on completion
We provide a written service record after every job. This documents exactly what was checked, what was found, and what was done — satisfying Victorian rental compliance requirements and most manufacturer warranty conditions.
Gas Heater Brands We Service in Melbourne
We service all major gas heater brands sold in Australia. Whether your heater is a modern Rinnai or an older Brivis ducted system, our licensed technicians have the experience and parts to service it properly.
RinnaiAll models
BrivisAll models
CannonAll models
BraemarAll models
VulcanAll models
PyroxAll models
PalomaAll models
Evaporative & DuctedAll brands
Don’t see your brand? Call us on 0488 800 693 — we service most brands of gas heaters sold in Australia. If we can’t service it, we’ll tell you who can.
Gas Heater Servicing for All System Types
Our service covers both wall-mounted and ducted systems, as well as gas log fires and space heaters. Each system type has specific components we inspect — the service is tailored to what your system needs.
Ducted Gas Heater Service
Full inspection including fan motor, heat exchanger, filter, burner, flue system, thermostat, and all gas connections. We also check airflow and duct integrity where accessible.
Wall-Mounted Gas Heater Service
Burner clean and inspection, pilot light check, CO test, gas pressure test, flue spillage test, and safety device checks. Suitable for all wall heater models.
Gas Log Fire Service
We inspect and clean the burner assembly, check CO levels, test the ignition system, inspect the flue and glass seals, and verify all safety cutouts are functioning.
Gas Space Heater Service
Full safety and performance check for freestanding and fixed gas space heaters. We check gas connections, burner condition, and all safety controls.
How Our Gas Heater Service Works
Booking a gas heater service with us is straightforward. Here is what happens from your first call to the service being completed.
1
Book Your Service
Call us on 0488 800 693 or use the online booking form. We’ll confirm a time that suits you — same-week appointments are available across Melbourne.
2
We Arrive on Time
Our licensed gas fitter arrives at your property at the agreed time with all the tools, testing equipment, and common parts needed for a complete service.
3
Full Safety and Performance Check
We work through our full service checklist — CO test, heat exchanger inspection, burner clean, gas pressure test, flue check, and all safety device tests.
4
Report and Recommendations
We tell you exactly what we found, what condition your heater is in, and whether any repairs or parts are needed. You decide — no pressure, no upselling.
5
Service Record Issued
We provide a written service record documenting everything we checked. Keep it for warranty purposes, rental compliance records, or your own peace of mind.
Most gas heater services take 45 minutes to 1.5 hours. Ducted systems with larger filter areas or complex flue arrangements may take a little longer.
Gas Heater Service Costs in Melbourne
We charge a fixed price for all gas heater services — you know exactly what you’re paying before we arrive. If repairs or parts are needed, we quote those separately and only proceed with your approval.
Wall Heater Service
From $150
Fixed price, all inclusive
- CO test
- Burner inspection and clean
- Gas pressure test
- Flue and safety check
- Service record included
Ducted Heater Service
From $200
Fixed price, all inclusive
- Full 12-point inspection
- Filter and fan clean
- Heat exchanger check
- CO test and flue spillage test
- Service record included
Gas Log Fire Service
From $160
Fixed price, all inclusive
- Burner and ignition clean
- CO emissions test
- Glass seal inspection
- Flue and safety check
- Service record included
Prices are indicative starting rates for standard systems in good condition. Older systems, complex flue arrangements, or systems requiring additional time may vary. We confirm the exact price when you book.
Why Melbourne Homeowners Choose The Gas Doctor
Fully Licensed Gas Fitters
All our technicians hold current VIC gas fitting licences. Every service meets Energy Safe Victoria standards.
Service Record Every Time
We document every job in writing. Essential for rental compliance, warranty claims, and your own peace of mind.
Fixed Upfront Pricing
You’re told the price before we start. No hidden charges, no hourly rate surprises — just a clear fixed cost.
Same-Week Availability
We typically book within the week. Before winter gets underway, early booking is strongly recommended.
Repairs in the Same Visit
We carry common parts in our vans. If minor repairs are needed during the service, we can often do them the same day.
5-Star Rated
Consistently rated 5 stars by Melbourne homeowners and landlords on Google and Facebook.
Gas Heater Servicing Across Melbourne
We service gas heaters across all of metropolitan Melbourne. Call us on 0488 800 693 or check the suburb tool on our homepage to confirm we cover your area.
Inner Melbourne
CBD, South Yarra, Fitzroy, Collingwood, Richmond, Prahran
Eastern Suburbs
Box Hill, Doncaster, Ringwood, Mitcham, Vermont, Templestowe
Western Suburbs
Footscray, Sunshine, Werribee, Hoppers Crossing, Altona
Bayside
Brighton, Sandringham, Cheltenham, Mentone, Beaumaris
Northern Suburbs
Northcote, Preston, Bundoora, Epping, Thomastown, Lalor
South-East
Dandenong, Berwick, Pakenham, Frankston, Narre Warren
Gas Heater Service Melbourne — Frequently Asked Questions
Common questions from Melbourne homeowners and landlords before booking.
How often should a gas heater be serviced in Melbourne?
Gas heater manufacturers and Energy Safe Victoria recommend annual servicing for all gas heaters. For rental properties in Victoria, landlords are legally required to service gas heaters at least every 2 years under the Residential Tenancies Act 1997. Annual servicing is always preferable to biennial servicing, particularly for older units.
How much does a gas heater service cost in Melbourne?
A standard wall-mounted gas heater service in Melbourne starts from $150. Ducted gas heater services start from $200. Gas log fire services start from $160. All prices are fixed and confirmed before we arrive. If repairs or replacement parts are needed, we quote those separately before proceeding.
What is checked in a gas heater service?
Our service covers: visual inspection of the heater body and casing, heat exchanger inspection for cracks, carbon monoxide (CO) emissions test, flue integrity and spillage test, gas pressure test, burner and ignition clean, pilot light check, safety device testing (overheat cutout, flame failure), thermostat operation check, gas connection leak test, and filter/fan clean for ducted systems. We provide a written service record on completion.
Is gas heater servicing a legal requirement for landlords in Victoria?
Yes. Under Victoria’s Residential Tenancies Act, landlords must have gas heaters in rental properties serviced at least every 2 years by a licensed gas fitter, and must keep a record of each service. Failure to comply can result in significant penalties. The Gas Doctor provides a service record after every job — keep it in your property file.
Do you service Rinnai / Brivis / Cannon gas heaters?
Yes. We service all major brands sold in Australia, including Rinnai, Brivis, Cannon, Braemar, Vulcan, Pyrox, Paloma, and more. If you have a brand not listed here, call us on 0488 800 693 and we’ll confirm whether we can service it.
What is the difference between a gas heater service and a gas heater repair?
A service is preventive maintenance — we inspect, clean, test, and document the condition of your heater to ensure it is safe and running correctly. A repair is reactive — fixing a specific fault or failure. If we find a fault during a service (e.g. a cracked heat exchanger or faulty thermostat), we will quote the repair separately and you decide whether to proceed in the same visit or book a follow-up.
When is the best time to book a gas heater service in Melbourne?
Ideally, book your service in late summer or early autumn (February to April) — before the Melbourne winter demand peaks in May and June. We get heavily booked from May onwards as people turn their heaters back on after summer. Early booking gets you the best availability and avoids the winter rush.
Book Your Gas Heater Service in Melbourne
Same-week bookings available. All brands serviced. Fixed pricing, written service record included with every job.